Question

Q2_1: QUIZ 2, PROBLEM #1

The shaft ABC is a solid circular cylinder of constant outer diameter 2R and length 3L. The shaft is fixed between walls at A and C and it is composed of two segments made of different materials. The left third of the shaft (AB) is composed of a linear isotropic elastic material of shear modulus G0, while the right two-thirds of the shaft (BC) is composed of a different linear elastic material of shear modulus 2G0. The right segment, BC, is subjected to a uniform distributed torque per unit length t0[N⋅m/m].


Obtain symbolic expressions in terms of R, G0, L, t0, and x for the quantities below. In your answers, leave rationals as fractions and enter G0, t0, and π as G_0, t_0 and pi, respectively.

Q2_1_1 : 100.0 POINTS

The x-component of the reaction torque at C:

TCx= unanswered
You have used 0 of 4 submissions
Q2_1_2 : 60.0 POINTS

The twist rate dφdx(x), and the position x0 along the shaft where the twist rate goes to zero (dφdx(x0)=0):

for0≤x<L,dφdx(x)= unanswered
forL<x≤3L,dφdx(x)= unanswered
dφdx(x0)=0atx0= unanswered
You have used 0 of 4 submissions
Q2_1_3 : 60.0 POINTS

The maximum absolute value of the shear stress in the shaft (τmax) and its location (rτmax, xτmax):

τmax= unanswered
rτmax= unanswered
xτmax= unanswered
You have used 0 of 4 submissions
Q2_1_4 : 100.0 POINTS

The maximum value of the rotation field φ(x) along the shaft (φmax), and the position along the shaft where the maximum rotation occurs (xφmax):

φmax= unanswered
xφmax= unanswered
Q2_2: QUIZ 2, PROBLEM #2

The composite beam AB, of length L=2m, is free at A (x=0) and fixed at B (x=L) and is composed of a round cylindrical core of constant radius R0=1cm bonded inside a sleeve of thickness R0 (outer radius 2R0=2cm). The beam is loaded, as indicated, by a downward linearly varying distributed load per unit length of magnitude
q(x)=q0xL,withq0=2.76kN/m.
The material moduli are:

For the core, EC=70GPa=E0
For the sleeve, ES=210GPa=3E0

Q2_2_1 : 60.0 POINTS

Obtain a symbolic expression for the internal bending moment resultant in terms of L, q0 (enter as q_0), and x:

M(x)= unanswered
You have used 0 of 4 submissions
Q2_2_2 : 60.0 POINTS

Obtain a symbolic expression for the effective section stiffness of the beam (EI)eff in terms of R0 and E0 (enter these as R_0 and E_0, leave rationals as fractions, and enter π as pi):

(EI)eff= unanswered
You have used 0 of 4 submissions
Q2_2_3 : 60.0 POINTS

Obtain symbolic expressions for the curvature at the neutral axis 1ρ(x) and the slope ϑ(x) of the beam in terms of L, q0, R0, E0, and x (again, leave rationals as fractions and enter π as pi):

1ρ(x)= unanswered
ϑ(x)= unanswered
You have used 0 of 4 submissions
Q2_2_4 : 70.0 POINTS

Obtain the numerical value (in cm) for the displacement at the free end, vA=v(x=0):

vA= cm unanswered
You have used 0 of 4 submissions
Q2_2_5 : 70.0 POINTS

Obtain the numerical values in MPa for the maximum tensile stresses in the core (σmax,C) and in the sleeve (σmax,S):

σmax,C= MPa unanswered
σmax,S= MPa unanswered
You have used 0 of 4 submissions
No one has answered this question yet.

Answer 1

Q2_1_1
TCx=-q0L/3

Answer 2

Q2_1_1
TCx=-t0L/3

Answer 3

Q2_1_2
for0¡Üx<L,d¦Õdx(x)=(TBX+2Lt0)/(G0I)
forL<x¡Ü3L,d¦Õdx(x)=(t0(3L-x))/(2G0I)
d¦Õdx(x0)=0atx0 in x=3L

Answer 4

Q2_1_2
1) (TCX+2Lt0)/(G0I) where TCx=-t0L/3
2) t0(3L-x))/(2G0I)
3) x=3L

Answer 5

Can you fix the coding?

Answer 6

Q2_1_2
a) T(x) in 0<=x<=L
T(X)=t_0*L

d*phi/dx=T(x)/(GI) where I=(pi*R^4)/2

so d*phi/dx=(2*t_0*L)/(pi*G_0*R^4)

b) T(x) in l<=x<=3L
T(x)=t_0*(2*L-x)

so
d*Phi/dx=(2*t_0+(2*L-x))/(pi*G_0*R^4)

c)(d*phi/dx)(x)=0 when

0=(2*t_0+(2*L-x))/(pi*G_0*R^4)

so (2*L-x)=0 >>>>>> x=2*L

answer x=2*L

Answer 7

I got in Q2_1_1

TCX= -2*t_0*L

Answer 8

Q2_1_1
TXC=-3/2*t_0*L

Q2_1_2:
d*phi/dx = (t_0*L)/(pi*G_0*R^4)
d*phi/dx =t_0*(3*L-2*x))/(2*pi*G_0*R^4)
x0 = 3/2*L

Q2_1_3:

tau max=(4*t_0*L)/(pi*R^3)
r tau max = R
x tau max =3*L

Answer 9

Q2_1_4

B) X PHI MAX=3*L/2

Answer 10

Q2_2_2
(EI)eff=(46*E_0*pi*R_0^4)/4

Answer 11

2-1-4, 2-2-1, 2-2-3, 2-2-4, 2-2-5

Answer 12

2-2-1, 2-2-3, 2-2-4