Ask a New Question

Question

A certain meter stick is calibrated in millimeters (the distance between two consecutive marks is ONE mm). A student measured the longest edge of a book and found that it was greater than 364 mm and less than 365 mm, but it was CLOSER to 365 mm than 364 mm. Give TWO possible answers for this measurement. Write your answers with the correct level of precision. (i.e, the correct number of digits to the right of the decimal point.)
13 years ago

Answers

Related Questions

a meter stick of wight 0.8 n is pivoted at 40 cm mark at which mark 1n load should be located to bal... The meter stick in the drawing can rotate about an axis located at the 20.0-cm mark. The axis is per... A meter stick has a mass of 200g and its center of gravity is at the 50.0 cm mark. If 150g is attach... A 65 g meter stick has two masses, each 250 g placed upon it. The first is located at 72 cm and the... In lab, a meter stick has its center of gravity at the 45.5 mark. The stick is supported with a mete... One end of a meter stick is pinned to a table, so the stick can rotate freely in a plane parallel to... A 0.105 kg meter stick is supported at its 40 cm mark by a string attached to the ceiling. A 0.77 kg... A 0.101 kg meter stick is supported at its 40 cm mark by a string attached to the ceiling. A 0.68 kg... The breadth of the meter stick,b= 2.75±0.05 Thickness of the meter stick,t=0.7±0.05 The diameter e...
Ask a New Question
Archives Contact Us Privacy Policy Terms of Use