Question
A cubic container full of hot water at a temperature of 90 °C is completely lagged with an insulating material of thermal conductivity 6.4x10-4 Wcm-1K-1 (6.4x10-2 Wm-1K-1). The edges of the container are 1.0 m long and the thickness of the lagging is 1.0 cm. Estimate the rate of flow of heat through the lagging if the external temperature of the lagging is 40 °C.
Answers
Good
None
Related Questions
If you place one full container of flour on one pan of a balance scale and similar container 3/4 ful...
A full container holds 5/8 of a gallon of liquid. If the container is 4/5 full, how much liquid is i...
A full container holds 5/8 of a gallon of liquid. If the container is 4/5 full, how much liquid is i...
a cubic container was completely filled with water. when 3/4 of the water from the container was pou...
A container is one fifth full of water. if 40 liters of water is required to fill it up, what is the...
A container of milk is 4/5 full.when 10 l of milk is poured into it the container becomes 9/10 full....
A container when 3/8 full holds 15 litres of gas how many litres of gas would be needed to fill 5 si...
A water container is 1/6 full. When 20 liters of water were added, it became 3/4 full. how many lite...
You measure a cubic container and find it to be about 10 cm on each side. From what you conclude tha...
A cubical container full of hot water at a temperature of 90 °C is completely lagged with an insulat...