ridhi
This page lists questions and answers that were posted by visitors named ridhi.
Questions
The following questions were asked by visitors named ridhi.
what is the importance of food?
17 years ago
A ball is thrown towards a vertical wall from a point 2m above the ground and 3m from the wall. the initial velocity of the ball is 20m/s at an angle of 30deg above the horizontal. if the collision of the ball with the ball is perfectly elastic. how far b...
13 years ago
while standing on an open truck moving at a velocity of 35m/s, a man sees a duck flying diresctly overhead. The man shoots an arrow at the duck and misses it.. the arrow leaves the bow at a vertical velocity of 98m/s. the truck accelerates to a constant s...
13 years ago
The length l of a simple pendulum is about 0.5m, and can be measured within 1mm. what accuracy is required in the measurement of periodic time T of 100 oscillations if the error in l and T are to produce equal percentage in the calculation of acceleration...
13 years ago
an object of mass 0.1kg is rotated in a horizontal circle by a string 1m long. the maximum tension in the string before it breaks is 50N.what is its maximum frequency reached?
13 years ago
Two projectiles A and B are projected at the same time in the same vertical plane. A is projected at a height of 2m above the ground making an angle of 30deg with the horizontal. B is projected with the velocity of 20m/s at an angle of 60deg with the hori...
13 years ago
two children ride bicycle towards each other with instant velocity of 20m/s and 10m/s. Each child releases a ball 6m above the ground with forward horizontal velocity of 40m/s relative to the bicycle. if the two balls collide in above the ground. what was...
13 years ago
Air is filled at 60deg C in a vessel of open mouth. Upto what temperature should the vessel be heated so that one-fourth of the air may escape? Ans 171degC
13 years ago
a metal cylinder containing water at 60ged C, has a thickness of 4mm.And the thermal conductivity 400W per m per K. it is lagged by felt of thickness 2mm and thermal conductivity 0.002W per m per K. the room temperature is 10deg C.Find the temperature gra...
13 years ago
If the pth term of an AP is q and the qth term is p, prove that its nth term is (p+q-n).
13 years ago
a mixture of 250g of water and 200g of ice at 0deg C is kept in a calorimeter which has a water equivalent of 50g. if 200g of steam at 100deg C is passed through this mixture, calculate the final temperature and the mass of contents of the calorimeter. an...
13 years ago
A geyser heats water flowing at the rate of 3L/min from 27 deg C to 77 deg C. if the geyser operates on a burner, what is the rate of combustion of the fuel if its heat of combustion is 40000J/g?
13 years ago
why when steady state conditions apply the rate of heat flow is the same?
13 years ago
a one brick thick wall of 10cm thickness has temperatures 40deg C and 5deg C at the surfaces. if the thermal conductivity of the brick is 0.6W per m per K, what is the rate of heat flow per unit area W per m square through the bricks if steady state condi...
13 years ago
Answers
The following answers were posted by visitors named ridhi.
Ok. The answer is 32.53m And i got that. I didn't use the L equation Instead i found the time taken to reach h=0m then found R using R=(VoCosα)t THANK YOU ALL SOO MUCHHH!!!! IT WAS GIVING ME A TOUGH TIME! :)
13 years ago
given; u=30km/hr=30*10/36=8.33m/s v=50km/hr=50*10/36=13.88m/s a=2.5m/s^2 a=(v-u)/t t=5.55/2.5 =2.22s so the answer is a
13 years ago
no the answer is 1.6 revolutions per second
13 years ago
are you sure we can use length of the string 1m as the radius? and why?
13 years ago
thanks alot...it was an easy method :)
13 years ago
sorry ''in'' isnt there!
13 years ago
thank you soo much :)
13 years ago
hmmm...ok thanks :)
13 years ago
thnakss soo much
13 years ago
thanks :)
13 years ago
thnaks :)
13 years ago
thanks :)
13 years ago
thanks so much :)
13 years ago
thank you so much :)
13 years ago