Ask a New Question

In a Direct Shear Test

In a Direct Shear Testplease help. 1)How do we determine the spacing between the two parts of shear box? What would happen if it
1. 0 answers
2. asked by Jacky
3. 523 views
A plane element is subjected to a shear stress τ = 360MPa which results to a shear strain σ = 0.008rad.a) determine the shear
1. 0 answers
2. asked by Sam
3. 634 views
Q.1 The normal stresses at a certain point in a body are 80MPa tension and 50Mpa compression. There are also shear stresses
1. 3 answers
2. asked by Anand
3. 632 views
A 4-point bending test is performed on the same beam, with symmetric loads of 5kN separated by 2m.Draw the bending moment and
1. 0 answers
2. asked by qwerty
3. 673 views
A shear force of 3.1 105 N is applied to an aluminum bar of length L = 19 cm, width w = 5.2 cm, and height h = 2.3 cm as shown
1. 0 answers
2. asked by Robert
3. 379 views
A steel bar with a cross sectional area of 25cm2 is found to shear fracture when subjected to a tensile load of 400kN. calculate
1. 1 answer
2. asked by dmkp
3. 513 views
A steel bar with a cross sectional area of 25cm2 is found to shear fracture when subjected to a tensile load of 400kN. calculate
1. 0 answers
2. asked by dmkp
3. 500 views
A steel channel section has a depth of 200 mm, flange width of 75 mm, and thickness of 10 mm. If the section is subjected to a
1. 1 answer
2. asked by Rajesh
3. 55 views
Steel will rapture if subjected to a shear stress of more that about 4.2 * 10 8 N/m2. What sidewardforce is necessary to shear a
1. 1 answer
2. asked by abdul Moiz
3. 428 views
An 11m beam is subjected to a load, and the shear force follows the equation V(x)=5+0.25x^2 where V is the shear force, x is the
1. 1 answer
2. asked by mih
3. 1,788 views