Setting Up Your Universal Remote Control Searching For Your Device Codes

Question

For example, to search for a code for your TV:
50. Turn on your TV
1. On the remote control, press TV once; the button will blink once. Then press and hold SETUP until the TV key blinks twice, then release SETUP
2. Enter 9-9-1. The key will blink twice.
3. Aim the remote control at the TV and slowly alternate between pressing PWR and TV. Stop when the TV turns off. NOTE: The remote control will send IR codes from its library to the selected device, starting with the most popular code.
4. Press SETUP once to lock in the code. The TV key will blink twice.
5. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVE, AUD, or CBL) for the device you are searching for

Which of following questions is correct based on the direction above?
A. The code for operating a TV using this remote control is 991.
B. The code obtained for a TV will work for other devices as well.
C. When the TV turns off during step 4, the remote control has found the code.
D. During step 5, the user must press the SETUP button twice to lock in the code
I thank the correct answer is B

Answer 1

Yes

Answer 2

Thank you!