Question 1 of 43

Question

Name three (3) ways to hold stock securely on the table of the drill press.
(3 points)
A.
Hands, feet, arms
B.
Gravity, carma, smart phone app
C.
Vice, jig, clamp
D.
Someone else holds it, magnetic wood device, drill press motor housing
E.
Compensation device, motor shaft, hand crank
Question 2 of 43
The blade on the table saw should never stick up more than _________ inch/inches above the stock to be cut.
(1 point)
A.
1/32 to 3/4
B.
1/8 to 3/4
C.
1/4 to 3/4
D.
1/2
E.
1/8 to 1/4
F.
3
Question 3 of 43
The _______________________ on the table saw is used to cross cut on the table saw.
(1 point)
A.
sliding T bevel
B.
cross cut sled or miter gauge
C.
red push stick
D.
push block
E.
triangle or square
Question 4 of 43
When starting the grinder, where does the operator (you) stand?
(1 point)
A.
On top
B.
To the side
C.
Behind
D.
In front
E.
Unplug first, then turn on
Question 5 of 43
An operator of a belt/disc sander should keep the fingers at least _______ inch/inches from the abrasive.
(1 point)
A.
1/32
B.
1/16
C.
1/8
D.
1/2
E.
1
F.
2

Answer 1

Here are the answers to the questions:

Question 1: C. Vice, jig, clamp

Question 2: E. 1/8 to 1/4

Question 3: B. cross cut sled or miter gauge

Question 4: B. To the side

Question 5: C. 1/8