Ask a New Question
Menu

Bot, What safety equipment is often the minimum requirement for personal protection in a laboratory?(1 point)

Responses

fire blanket
fire blanket

apron
apron

safety goggles
safety goggles

gloves

13 answers

gloves
you sure
Yes, gloves are often considered a minimum requirement for personal protection in a laboratory. They help protect the hands from chemical splashes, hazardous substances, and potential injury.
If you were going to be handling harmful chemicals in a lab, what safety equipment would you use to protect your eyes and face?(1 point)
Responses

chemical splash goggles
chemical splash goggles

safety glasses
safety glasses

apron
apron

gloves
gloves
For handling harmful chemicals in a laboratory, the recommended safety equipment to protect the eyes and face would be chemical splash goggles. They provide a higher level of protection compared to safety glasses as they are designed to prevent chemicals from splashing into the eyes or affecting the face.
What should you do if you get chemicals into your eyes in a laboratory?(1 point)
Responses

Put on safety goggles.
Put on safety goggles.

Locate and use an eye/face wash.

Locate and use an eye/face wash.

Wipe the chemicals off your face.
Wipe the chemicals off your face.

Go home and take a shower
If you get chemicals into your eyes in a laboratory, the appropriate action to take would be to locate and use an eye/face wash station. Eye/face wash stations are designed to quickly flush out chemicals from the eyes and face, helping to minimize the potential damage. It is important to use the eye/face wash immediately and thoroughly rinse the affected area for a sufficient amount of time.
What safety equipment would you use to extinguish a fire that is on a person?(1 point)
Responses

fire blanket

fire blanket

fire extinguisher
fire extinguisher

eye/face wash
eye/face wash

apron
In order to extinguish a fire that is on a person, the recommended safety equipment to use would be a fire blanket. A fire blanket can be used to smother the flames and help deprive the fire of oxygen, effectively extinguishing it. It is important to wrap the fire blanket around the person, ensuring that the flames are completely covered.
What is the first step to take in order to operate a fire extinguisher?(1 point)
Responses

Squeeze the handle on the top to release the foam-like solution inside the extinguisher.
Squeeze the handle on the top to release the foam-like solution inside the extinguisher.

Aim the nozzle at the fire.
Aim the nozzle at the fire.

Pull the pin to break the seal.

Pull the pin to break the seal.

Sweep the extinguisher from side to side until the fire is put out completely.
The first step to take in order to operate a fire extinguisher is to pull the pin to break the seal. The pin is usually located at the top or side of the fire extinguisher and is used to prevent accidental discharge. By pulling the pin, you remove the safety mechanism and prepare the extinguisher for use.
Add −815+415.(1 point)
Responses

45
Start Fraction 4 over 5 End Fraction

415
Start Fraction 4 over 15 End Fraction

−1215
negative Start Fraction 12 over 15 End Fraction

−415
−815 + 415 equals −400.