Question

In a Direct Shear Test

please help.

1)How do we determine the spacing between the two parts of shear box? What
would happen if it is not set properly?

2) The shear and normal stress can be calculated with the corrected area
considering the movement of displacement. How would this affect the results?

Related Questions

A cast iron block of 5Cm^2 cross section carries an axial compressive load of 50KN.Calculate the mag... A plane element is subjected to a shear stress τ = 360MPa which results to a shear strain σ = 0.008r... Proportional spacing replaced what other kind of spacing? A.) parallel spacing B.) monospaci... A steel channel section has a depth of 200 mm, flange width of 75 mm, and thickness of 10 mm. If the...