Ask a New Question

Asked by Joseph

A 2.2m of steel wire hangs vertically down from a support. A 1.5m length of brass wire of the same diameter is attached to the lower end of the steel wire.when a 10 kg mass is attached to the lower end of the brass wire a total extension of 0.05 m is produced. by how much does each wire extend? (young's modulus for steel = 2.0 x 10^11pa, young's modulus for brass = 9.2 x 10^10 pa)
12 years ago

Answers

Related Questions

A steel wire is tied to two chairs and kept taut. 2 students sit one on each chair. A weight is atta... A steel wire in a piano has a length of 0.6000 m and a mass of 3.000 10-3 kg. To what tension must... A 30.0 m steel wire and a 22.0 m copper wire, both with 1.00 mm diameters, are connected end to end... a 5.63kg ball hangs from a vertical pole by a 2.4 long string. Assume the ball is moving at 4.33m/s... A thin aluminum ring hangs vertically from a torsion spring. A torsion spring when twisted exerts a... A steel wire and a copper wire, each of diameter 2.000 mm, are joined end to end. At 48.0°C, each ha... A steel ball hangs in a 147cm thread which is dragged right and then let go. Velocityh of the ball i... A 4.0-m-long steel wire has a cross-sectional area of 0.050cm2. Its proportional limit has a value o... A steel wire is used to lift heavy object. The cable has a diameter of 14.25 mm and an initial lengt... A steel wire 2.7-mm in diameter stretches by 0.211 percent when a mass is suspended from it. How lar...
Ask a New Question
Archives Contact Us Privacy Policy Terms of Use