Ask a New Question
Menu

1) ______________ allow drivers to pass other vehicles.

a) Solid yellow lines
b) Solid right lines
c) Broken white lines
d) Yellow edge line
2) Expressways are designed to assist drivers in early identification of roadway:
a) Hazards and conditions
b) Speed limits
c) Traffic flow
d) Traffic volume
3) _____________ are needed to avoid two vehicles transitioning to the same spot in the same lane.
a) Scanning techniques
b) Blocked lanes
c) Medians
d) Barriers
4) Merging vehicles should always give existing expressway traffic the right of way.
a) True
b) False
5) Lanes of traffic on expressways that flow in opposing directions are divided by a:
a) Solid yellow line
b) Solid white line
c) Median
d) Broken white line
6) Upon exiting the expressway, you should ______ your current speed and then _______ when you reach the deceleration lane.
a) Maintain, slow down
b) Increase, slow down
c) Maintain, stop
d) Increase, stop
7) If bad pavement is encountered a driver should:
a) Slow speed and change lanes as soon as possible
b) Slow speed, stay in the same lane as much as possible and driver with special attention until reaching an area of good pavement
c) Continue as normal and drive over the bad pavement as safely as possible
d) Increase speed to swerve around bad pavement areas
8) _____________ indicate no passing or crossing.
a) Broken white lines
b) Solid white lines
c) Broken yellow lines
d) Solid yellow lines
9) Some problems associated with lane management include:
a) Poor visibility
b) Curves on ramp
c) Reaction time of drivers in the driving environment
d) All of the above
10) An example of a regulatory sign is:
a) No Right Turn sign
b) One Way sign
c) Speed limit sign
d) All of the above
11) Expressway lane markings are of a different design and meaning as on other roadways.
a) True
b) False
12) Driving too slowly on expressways can be just as dangerous as driving too quickly.
a) True
b) False
13) HOV stands for:
a) High Occupancy Vacancy
b) High Operating Volume
c) High Octane Vehicle
d) High Occupancy Vehicle
14) A red "X" over a lane indicates that travel in that lane is prohibited.
a) True
b) False
15) Focusing on the ____________ to merge into will assist in making adjustments in driving if that area becomes unavailable before reaching it.
a) Chosen space gap
b) Speed of other vehicles
c) Length of the merge lane
d) Road conditions
16) Maneuvers that are prohibited on expressways are:
a) Turning
b) Crossing the grassy median
c) Stopping
d) All of the above
17) Before entering an expressway, look for _______ signs stating WRONG WAY or DO NOT ENTER.
a) Black and white
b) Red and white
c) Red and yellow
d) Green and white
18) Expressways routinely have lower crash frequency rates than other roadway types.
a) True
b) False
19) Stopping on expressways is prohibited.
a) True
b) False
20) ________ speed before entering the expressway lane will allow traffic to continue travel with little interruption from the merging vehicles.
a) Increasing
b) Decreasing
c) Maintaining
d) Increasing then decreasing
21) The three most common expressway interchange types are cloverleaf, diamond and trumpet interchanges.
a) True
b) False
22) ______________ are diamond shape and predominately yellow and black.
a) Regulatory signs
b) Warning signs
c) Guide signs
d) Interstate signs
23) Around construction areas, drivers should allow for ____________ following distance at the front and rear of the vehicle.
a) Increased
b) Decreased
c) The same
d) No
24) The right lane of traffic on an expressway is for ___________.
a) Fast moving vehicles
b) Slower moving vehicles
c) Bicyclists
d) All of the above
25) A cloverleaf interchange typically includes ______________ to permit traffic leaving one roadway and concurrently exiting from another roadway.
a) Weave lanes
b) Slow lanes
c) Emergency lanes
d) HOV lanes

1 answer

Here are the answers to the questions you provided:

  1. c) Broken white lines
  2. a) Hazards and conditions
  3. a) Scanning techniques
  4. a) True
  5. a) Solid yellow line
  6. a) Maintain, slow down
  7. b) Slow speed, stay in the same lane as much as possible and drive with special attention until reaching an area of good pavement
  8. d) Solid yellow lines
  9. d) All of the above
  10. d) All of the above
  11. a) True
  12. a) True
  13. d) High Occupancy Vehicle
  14. a) True
  15. a) Chosen space gap
  16. d) All of the above
  17. b) Red and white
  18. a) True
  19. a) True
  20. c) Maintaining
  21. a) True
  22. b) Warning signs
  23. a) Increased
  24. b) Slower moving vehicles
  25. a) Weave lanes

Feel free to ask if you have more questions or need further clarification!