Ask a New Question

Question

The prong of a tuning fork moves back and forth when it is set into vibration. The distance the prong moves between its extreme positions is 2.24 mm. If the frequency of the tuning fork is 440.7 Hz, what are the maximum velocity and the maximum acceleration of the prong? Assume SHM.
15 years ago

Answers

Related Questions

With a tuning fork of 384 hz, resonance tube lengths are acheived at 0.647m and 1.09 m. What is the... A tuning fork of frequency 558 Hz is placed near the top of the pipe shown in the Figure. The water... Why should a tuning fork be set into oscillation by striking it with a soft rubber mallet rather tha... A 520 Hz tuning fork produces a standing wave in a column of air in a closed tube. If the speed of s... A 350-Hz tuning fork is held above a closed pipe. Find the spacings between the resonances when the... When a tuning fork is held over the open end of a very thin tube, as in the figure below, the smalle... a 333 hz and 337 hz tuning forks are struck simultaneously. whats will be the beat frequency? 31. Tuning fork 1 (420 Hz) is sounded with tuning fork 2 and 20 beats are count in 10s. a) What are... 3. A 512 Hz tuning fork and a 1024 Hz tuning fork are struck with a hammer of the same intensity.... A tuning fork of 500 Hz is struck in a room with a speed of sound of 340 m/s. What is the distanc...
Ask a New Question
Archives Contact Us Privacy Policy Terms of Use