Question

Question 16 of 43
Never saw through ______________ knots.
(1 point)
A.
tight
B.
loose
C.
brown
D.
wide
E.
big
Question 17 of 43
What part of the portable belt sander does the operator check before plugging it in?
(1 point)
A.
Belt
B.
Trigger
C.
Dust bag
D.
Cord
Question 18 of 43
The clearance between the sanding disc and the table on the belt/disc sander is no more than _________ inch/inches.
(1 point)
A.
1/16 to 1/2
B.
1/8 to 14
C.
1/16 to 1/8
D.
1/2
E.
3/4
F.
1
Question 19 of 43
Be sure at least _____________ inch/inches of the bit shank of the router is in the chuck of a router.
(1 point)
A.
1/8
B.
1/4
C.
1/2
D.
3/4
E.
1
F.
1 1/2
Question 20 of 43
When using a jointer, never cut deeper than ___________ inch/inches. The jointer is usually set at a 1/16".
(1 point)
A.
1
B.
1/8
C.
1/4
D.
1/2

Answer 1

**Question 16: Never saw through ______________ knots.**
The correct answer is: **A. tight**

**Question 17: What part of the portable belt sander does the operator check before plugging it in?**
The correct answer is: **D. Cord**

**Question 18: The clearance between the sanding disc and the table on the belt/disc sander is no more than _________ inch/inches.**
The correct answer is: **C. 1/16 to 1/8**

**Question 19: Be sure at least _____________ inch/inches of the bit shank of the router is in the chuck of a router.**
The correct answer is: **B. 1/4**

**Question 20: When using a jointer, never cut deeper than ___________ inch/inches. The jointer is usually set at a 1/16".**
The correct answer is: **B. 1/8**