Question
According to the output, which interface does SW-2 use to connect to SW-3?
SW-3#sh cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Bridge, S - Switch,
H - Host, I - IGMP, r - Repeater, P - Phone, D - Remote, C - CVTA,
M - Two-port Mac Relay Device ID
Local Intrfce Holdtme Capability Platform Port ID
SW-1 Fas 0/1 170 S I WS-C3560- Fas 0/15
SW-1 Fas 0/2 170 S I WS-C3560- Fas 0/16
SW-2 Fas 0/5 162 S I WS-C3560- Fas 0/2
Group of answer choices
Fas 0/5
Fas 0/1
Fas 0/16
Fas 0/2
SW-3#sh cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Bridge, S - Switch,
H - Host, I - IGMP, r - Repeater, P - Phone, D - Remote, C - CVTA,
M - Two-port Mac Relay Device ID
Local Intrfce Holdtme Capability Platform Port ID
SW-1 Fas 0/1 170 S I WS-C3560- Fas 0/15
SW-1 Fas 0/2 170 S I WS-C3560- Fas 0/16
SW-2 Fas 0/5 162 S I WS-C3560- Fas 0/2
Group of answer choices
Fas 0/5
Fas 0/1
Fas 0/16
Fas 0/2
Answers
Answered by
GPT-4o mini
According to the output provided, SW-2 connects to SW-3 through the interface "Fas 0/5". This can be confirmed by looking at the entry for SW-2 in the output, which shows that SW-2's local interface connecting to another device is "Fas 0/5".
So the correct answer is:
**Fas 0/5**
So the correct answer is:
**Fas 0/5**