The Asaro water collected by students has a pH of 7, which is slightly lower than the WHO standard of 8.1. This indicates that the water may be slightly acidic compared to the recommended pH level for drinking water.
The conductivity of the Asaro water is 13.15, which is much lower than the WHO standard of 2005. A low conductivity level indicates that the water may have low mineral content and may be less prone to contamination from dissolved solids.
The TDS of the Asaro water is 23.9 mg/L, which is significantly lower than the WHO standard of 1451 mg/L. This suggests that the water may have lower levels of dissolved solids and minerals compared to the recommended guideline.
The TSS of the Asaro water is less than 1 gram, which is in line with the WHO standard of less than 1 mg/L. This indicates that the water may be free from suspended particles and sediments.
Overall, the properties of the Asaro water collected by students suggest that it is of good quality based on the WHO standards. However, the slightly lower pH level may indicate that the water is slightly acidic and may require treatment to bring it closer to the recommended pH level for drinking water.
Sample Asaro water has pH of 7, conductivity of 13.15 , TDO is 20 mg/L , temperature of 21.8,TDS is 23.9 mg/L and TSS is less than 1 gram, and for the standard parameters from WHO are, pH of 8.1 , conductivity 2005, calcium 12.9mg/L, total hardness is 30, total alkalinity 1102, chloride 55 mg/ L, fluoride 7.9 mg/L, sulphate 39 mg/L, TDS 1451Mg /L,arsenic 15 mg /L, and TSS less than 1 mg/L. In more details how quality the water is by comparing the properties of Asaro water collected by students to standards properties taken from WHO?
1 answer