Question 1 (SO 1, AC 1, AC 2, AC 3, SO 2, AC 1, AC 2, AC 3)

To set up a local area network (LAN) environment, you will need the following devices and tools:

- Ethernet cables
- Switch or router
- Network interface cards (NICs) for each computer
- Computer with operating system software
- Internet connection (optional)

Here are the steps to install LAN devices in an enabling environment:

1. Carefully read and understand the manufacturer's installation manual or specifications:
- Before starting the installation process, make sure to read the manufacturer's manual or specifications for each LAN device to ensure proper installation procedures.

2. Complete the manufacturer's diagnostic test free of errors:
- Before connecting the LAN devices, run the manufacturer's diagnostic test to check for any errors or issues. Resolve any problems before proceeding with the installation.

3. Locate and interconnect LAN devices according to manufacturer's specifications:
- Place the switch or router in a central location where all computers can easily connect to it. Use Ethernet cables to interconnect the devices according to the manufacturer's specifications.

4. Configure and customize LAN devices according to manufacturer's specifications:
- Access the configuration settings of the LAN devices and follow the manufacturer's instructions to set up the network settings, such as IP addresses, subnet masks, and DNS servers.

5. Check that LAN devices are working and performing according to manufacturer's standards:
- Test the LAN devices to ensure they are functioning properly. Check for network connectivity and data transfer speeds to confirm that the devices are meeting the manufacturer's standards.

6. Ensure that LAN system software and application software operate according to manufacturer's specifications:
- Install any necessary LAN system software and application software on the computers connected to the network. Configure the software settings according to the manufacturer's specifications.

7. Verify that LAN system software and application software are configured and customized according to installation specifications:
- Check the settings of the LAN system software and application software to ensure they are customized according to the installation specifications. Make any necessary adjustments if needed.

8. Test that LAN system software and application software perform according to manufacturer's and installation specifications:
- Run tests on the LAN system software and application software to verify that they are performing according to the manufacturer's and installation specifications. Troubleshoot any issues that arise during testing.

By following these steps and ensuring that the LAN devices are installed and configured correctly, you will be able to create a functional LAN environment that meets the manufacturer's standards and specifications. It is important to have your facilitator/assessor present during the demonstration to evaluate your installation process.