Asked by Kozylovesyou
What safety equipment is often the minimum requirement for personal protection in a laboratory?(1 point)
Responses
apron
apron
fire blanket
fire blanket
gloves
gloves
safety goggles
Responses
apron
apron
fire blanket
fire blanket
gloves
gloves
safety goggles
Answers
Answered by
Kozylovesyou
If you were going to be handling harmful chemicals in a lab, what safety equipment would you use to protect your eyes and face?(1 point)
Responses
apron
apron
gloves
gloves
safety glasses
safety glasses
chemical splash goggles
Responses
apron
apron
gloves
gloves
safety glasses
safety glasses
chemical splash goggles
Answered by
Kozylovesyou
What should you do if you get chemicals into your eyes in a laboratory?(1 point)
Responses
Locate and use an eye/face wash.
Locate and use an eye/face wash.
Put on safety goggles.
Put on safety goggles.
Go home and take a shower
Go home and take a shower
Wipe the chemicals off your face.
Responses
Locate and use an eye/face wash.
Locate and use an eye/face wash.
Put on safety goggles.
Put on safety goggles.
Go home and take a shower
Go home and take a shower
Wipe the chemicals off your face.
Answered by
Kozylovesyou
What safety equipment would you use to extinguish a fire that is on a person?(1 point)
Responses
apron
apron
fire extinguisher
fire extinguisher
fire blanket
fire blanket
eye/face wash
Responses
apron
apron
fire extinguisher
fire extinguisher
fire blanket
fire blanket
eye/face wash
Answered by
Kozylovesyou
What is the first step to take in order to operate a fire extinguisher?(1 point)
Responses
Squeeze the handle on the top to release the foam-like solution inside the extinguisher.
Squeeze the handle on the top to release the foam-like solution inside the extinguisher.
Sweep the extinguisher from side to side until the fire is put out completely.
Sweep the extinguisher from side to side until the fire is put out completely.
Aim the nozzle at the fire.
Aim the nozzle at the fire.
Pull the pin to break the seal.
Responses
Squeeze the handle on the top to release the foam-like solution inside the extinguisher.
Squeeze the handle on the top to release the foam-like solution inside the extinguisher.
Sweep the extinguisher from side to side until the fire is put out completely.
Sweep the extinguisher from side to side until the fire is put out completely.
Aim the nozzle at the fire.
Aim the nozzle at the fire.
Pull the pin to break the seal.
Submit Your Answer
We prioritize human answers over AI answers.
If you are human, and you can answer this question, please submit your answer.