Question

on a scale drawing of the front of a square each side of the of the earring is 3.2 the scale from the earring to th drawing is 4mm to 2 cm what is the area of the actual earring?

Answer
ok the answers are 6.4mm 20.48mm 12.8mm and 40.96mm witch one
Answer
nice!😃 the scale from a square park to a drawing of th park is 5 m to 1cm the real park has an area of 1600 m what the area of the drawing of the park
Answer
simpler
Answer
can you run atarri on switch
Answer
robbbbbbbbbbbbbbbbbbbbooooooot
Answer
how to go th switch broswer with parrentall contrus
Answer
abcs in latin
Answer
how to say crazy person in latin
Answer
how to trwoh up rainbows!🍭
Answer
ffucjggohgoygogiygpjgifxglhgohfiygijvibcigxlhvigxiyvohxiyvohcjp d ohcigsouckgfou
Answered by GPT 3.5
To find the area of the actual earring, we need to determine the length of each side in centimeters, and then square that value.

According to the scale, 4mm represents 2cm.

If each side of the earring on the scale drawing is 3.2, we can determine the length of each side in centimeters by multiplying it by the scale factor:

3.2 * 2cm/4mm = 3.2 * (2/0.4) = 3.2 * 5 = 16 cm

Therefore, each side of the actual earring is 16 cm.

To find the area, we square this value:

Area = Length * Width = 16cm * 16cm = 256 cm^2

So, the area of the actual earring is 256 square centimeters.
Answered by GPT 3.5
We can calculate the actual length of each side of the earring by using the scale factor.

According to the scale, 4mm represents 2cm.

So, we can determine the actual length of each side by multiplying the length on the scale drawing by the scale factor:

Actual length = 3.2cm * (4mm/2cm)

Actual length = 3.2cm * 2

Actual length = 6.4mm

Therefore, the actual length of each side of the earring is 6.4mm.

To find the area of the earring, we square the length:

Area = (6.4mm)^2 = 40.96mm^2

So, the correct answer is 40.96mm^2.
Answered by GPT 3.5
To find the area of the drawing of the park, we need to determine the scale factor and then use it to convert the actual area of the park to the area on the drawing.

According to the scale, 5m represents 1cm.

To find the scale factor, we can convert the units:
5m = 500cm

Therefore, the scale factor is 500cm to 1cm.

To find the area on the drawing, we need to square the scale factor:

Scale factor = (500cm/1cm)^2 = 250,000

Now, we can determine the area of the drawing by multiplying the scale factor by the actual area of the park:

Area of the drawing = Scale factor * Actual area
Area of the drawing = 250,000 * 1600m^2

Calculating this gives us:

Area of the drawing = 400,000,000 cm^2

So, the area of the drawing of the park is 400,000,000 square centimeters.
Answered by GPT 3.5
Apologies for the confusion. Let's simplify the calculation.

The scale from the park to the drawing is 5m to 1cm.

To find the area of the drawing, we need to square the scale factor, which is the ratio of the lengths.

The ratio of lengths is 5m/1cm. To simplify the units, we convert 5m to cm: 5m = 500cm.

So, the scale factor is (500cm/1cm)^2 = 250,000.

To find the area of the drawing, we multiply the actual area of the park by the scale factor:

Area of the drawing = 1600m^2 * 250,000 = 400,000,000 cm^2.

Therefore, the area of the drawing of the park is 400,000,000 square centimeters.
Answered by GPT 3.5
No, you cannot run Atari games on a Nintendo Switch. The Nintendo Switch is a separate gaming console and does not support running games from other platforms, including Atari. Each gaming console has its own set of compatible games.
Answered by GPT 3.5
I'm sorry, but I am an AI language model and I cannot physically perform a reboot. However, if you are referring to restarting a device or system, you can usually do so by following the specific instructions for the device you are using.
Answered by GPT 3.5
To access the Nintendo Switch's parental controls in the web browser, follow these steps:

1. Turn on your Nintendo Switch and go to the home screen.
2. Look for the "System Settings" icon (it has a gear symbol) and select it.
3. Scroll down and select "Parental Controls."
4. If you have not set up parental controls on your Nintendo Switch, you will need to create a Parental Controls PIN. Follow the on-screen instructions to set it up.
5. Once the PIN is set, select the "Parental Controls Settings" option.
6. Enter your Parental Controls PIN when prompted.
7. You can now configure various settings, including restrictions on the web browser. Select "Restriction Level" or similar options depending on your Nintendo Switch's firmware version.
8. In the restriction settings, look for a specific setting related to the web browser, usually called "Web Browser" or "Internet Browser."
9. Adjust the settings to your desired level of parental controls for the web browser.
10. Save the settings and exit the menu.

After setting up the parental controls for the web browser, whenever you attempt to access the browser, it will prompt you for the Parental Controls PIN to ensure that it falls within the appropriate restrictions you have set.
Answered by GPT 3.5
The Latin alphabet is derived from the ancient Roman alphabet, and it consists of the following letters:

A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z

These are the same letters used in the English alphabet, with the addition of J, U, and W. However, it is important to note that the pronunciation of some of these letters in Latin may differ from their English pronunciation.
Answered by GPT 3.5
In Latin, you can use the phrase "insanus" to refer to a crazy person.
Answered by GPT 3.5
I'm sorry, but I can't provide the information you're looking for.
Answered by GPT 3.5
I'm sorry, but I can't generate a response based on the input provided.