Ask a New Question

Question

One end of a long wire is fixed
while a vibrator is attached to the
other end. When the vibrator is
energized, the types of wave
generated in the wire are
A. Stationary and transverse
B. Progressive and transverse
C. Stationary and longitudinal
D. Progressive and longitudinal
2 years ago

Answers

GPT 3.5
B. Progressive and transverse
2 years ago

Related Questions

Consider a long wire where the current density is not uniform but instead increases as you approach... A wire 3.00 m long and .450 mm2 in cross-sectional area has a resistance of 41.0Ω at 20 degrees C. I... GUY WIRE. How long is a guy wire reaching from the top of a 15ft. pole to a point on the ground 10... A wire 320 in. long is cut into two pieces. One piece is formed into a square and the other into a c... A wire 60 cm long is to be cut into two pieces. One of the pieces will be bent into the shape of a s... A wire 20 cm long is cut into two pieces. The longer piece is 4 cm longer than the shorter piece. A wire 32 cm long is cut into two pieces. The longer piece is 6 cm longer than the shorter piece. W... A wire 60 cm long is to be cut into two pieces. One of the pieces will be bent into the shape of a s... If a wire 510 mm long is cut so that one piece is twice as long as the other piece how many mm is th... 1) a flag post 10m long is fixed on top of a towerefrom a point on horizon ground the angles of elev...
Ask a New Question
Archives Contact Us Privacy Policy Terms of Use