Question

Can Anyone help me with this physics problem?

The piston of a bicycle pump is circular in shape and has a diameter of 3.18 cm. When you exert a pushing force on the pump handle, it exerts a pressure of 225 kpa on the air inside the pump cylinder.
1) What is the force exerted on the pump handle?
2) What is the pressure of units of psi?
Note: the 225 kpa is gauge pressure. If the force on the handle had been zero, the gauge pressure would be zero because the pressure inside and outside the pump cylinder would be the same.
At a playground, a 19.7-kg child plays on a slide that drops through a height of 2.29 m. The child starts at rest at the top of the slide. On the way down, the slide does a nonconservative work of -368 J on the child. What is the child's speed at the bottom of the slide?
radius = .0318/2 = .0159 meters

area = pi r^2 = 7.94*10-4 meters^2

force = 225,000 Newtons/m^2 * 7.94*10^-4m^2
= 22.5 *7.94 N
= 179 Newtons

32.6 pounds/square inch
225,000 Pa =

Related Questions

In a hydraulic piston set up, one circular piston has a diameter of 2 cm,while the other piston has... When you push down on the handle of a bicycle pump, a piston in the pump cylinder compresses the ai... A piston in a bicycle pump is pressured half way into the pump without letting air get out and at un... iv. When you use a hand pump to inflate the tires of your bicycle, the pump gets warm after a while....