Ask a New Question

Asked by kanimozhi

The circuit below contains two dependent sources: a voltage controlled voltage source and a voltage controlled current source.


Figure 3-1
The circuit elements have the following values: Vin=15V, R1=0.5Ω, R2=1.5Ω, R3=5Ω, A=2V/V and B=1.5A/V.
8 years ago

Answers

Answered by sri
1.13
8 years ago

Related Questions

What happens in a circuit if there is a lot of resistance? heat Consider the circuit in the diagram. Let R1 = 51.0 Ω, R2 = 38.0 Ω, R3 = 74.0 Ω, R4 = 16.0 Ω, and V =... Consider a circuit with an RL series with L=0.09 H and R=0.05 Ohm. At t=0 the circuit is connected t... You have an RC circuit and you measure the "zero" voltage to actually be 2.385 [Volts]. The peak vo... Consider the following circuit that contains a battery and six identical resistors: The diagram h... A circuit has R = 16.6 Ω and the battery emf is 6.50 V . With switch S2 open, switch S1 is closed. A... For the circuit below, V1 has rms voltage of Vrms=10V. The turn ratio of the primary to secondary si... In a circuit, if A1 = 4A, A2 = 2A and A3 = 2A, what would A4 read? The following circuit is at steady state for t<0. At t=0 sec, the switch is open. Let R1=10 ohms, R...
Ask a New Question
Archives Contact Us Privacy Policy Terms of Use