Ask a New Question

Asked by carolyn

A circular wire is connected to a galvanometer. A solenoid is placed inside the circular wire. The solenoid has 520 turns per meter, a cross-sectional area of 0.007 m^2 and a current charge from 0A to 0.7A in 1.25 ms. The circular wire has a n are of 0.01m^2 and a resistance of 1.6 ohms. What current is displayed on the galvanometer?
9 years ago

Answers

Related Questions

a guy wire is connected 3 ft. from the top of a pole. The guy wire is 36 ft long and it is fastened... A circular steel wire 2.00 m is to stretch no more than 0.25 cm when a tensile force of 400 N is app... A copper wire has a circular cross section with a radius of 3.75 mm. If the wire carries a current... A platinum wire is connected to a battery.If the temperature increases, will the current in the wire... A circular wire of radius R carries a total charge Q distributed uniformly over its circumference.... Two concentric circular wire loops in the same plane each carry a current. The larger loop has a cur... A wire with a circular cross section and a resistance R is lengthened to 3.77 times its original len... A circular metal wire, with a radius of 0.5 mm, has a force of 2 kN applied along it. If the wire h... Braddy connected the loose wire to the battery and created an electromagnet. He picked up 45 thumb t... If a 6 ohm wire is connected to a 10 volt battery, what will the current be? .67 amperes 1.67...
Ask a New Question
Archives Contact Us Privacy Policy Terms of Use