Ask a New Question

Question

You have a stainless steel hollow rod (E=193GPa,ν=0.29) that has an inner radius r of 1.2cm, a wall thickness t of 0.7mm, and a length L of 5cm. Calculate the critical loads, in kN, for local buckling and Euler bucking (Pcr,local and Pcr,Euler, respectively). Which would happen first? Assume n=1. For a thin-walled cylinder, A=2πrt and I=πr3t.

Pcr,local (in kN):

Pcr,Euler (in MN):

Which occurs first?
Local Buckling
Euler Buckling
10 years ago

Answers

terf
local occurs first
9 years ago

Related Questions

75L stainless steel container was charged with 3 atm of hydrogen gas and 4 atm of oxygen gas. a spar... A 75.0 L stainless steel container was charged with 3.00 atm of hydrogen gas and 4.00 atm of oxygen... Consider a stainless steel annular disk with an outer radius 66 mm and inner radius 7.1 mm. The mass... Consider a stainless steel annular disk with an outer radius 68mm and inner radius7.4mm. The mass of... A stainless-steel orthodontic wire is applied to a tooth, as in the figure below. The wire has an un... Stainless steel is an alloy of iron containing 5 percent nickel and 0. 175 percent chromium. How mu... A piece of stainless steel (Sstainless steel = 0.50 j/g* C) is transferred from an oven (180 *C) to... a stainless steel orthodontic wire is applied to a tooth.the wire has an upstretched length of 3.1cm... What is stainless steel A stainless steel knife has a density of 8gramspercubic centimeter and a volume of 3cubic centimeter...
Ask a New Question
Archives Contact Us Privacy Policy Terms of Use