Ask a new Strength of Materials question. Multiple AIs will answer your question.

Newest Strength of Materials Questions

1. A steel tube 30 mm outside diameter and 25 mm internal diameter and length 500 mm is subjected to a tensile load of 37 KN,
   1. 1 answer
   2. asked by engineering
   3. 700 views
2. CONICAL SHAFT WITH DISTRIBUTED TORSIONAL LOADThe conical shaft AB is made of steel, with shear modulus G0. The shaft has length
   1. 3 answers
   2. asked by GaryG
   3. 707 views
3. A piece of material 15 cm long by 2.5 cm square is in compression under a load 100 kN.If the modulus of elasticity of the
   1. 1 answer
   2. asked by ripon
   3. 445 views
4. a steel bar 10m long and 10cm*10cm in section .it is subjected to an axial pull of 250KN .determine the intensities of normal
   1. 3 answers
   2. asked by sushil
   3. 624 views
5. A round bar 40mm diameter is subjected to an axial pull of 80kN andreduction in diameter was found to be 0.00775mm. Find
   1. 3 answers
   2. asked by aswath
   3. 3,277 views
6. A tapered thin-wall circular shaft has constant wall thickness, t, length L, and diameters linearly varying between dA at the
   1. 11 answers
   2. asked by Sat
   3. 692 views
7. The cylindrical bar in the figure has a total length L=1.2 m, a diameter d=15 mm, and is confined by fixed supports at the walls
   1. 1 answer
   2. asked by XYZ
   3. 1,098 views
8. A steel bar with a cross sectional area of 25cm2 is found to shear fracture when subjected to a tensile load of 400kN. calculate
   1. 0 answers
   2. asked by dmkp
   3. 531 views
9. A hollow circular shaft has an external diameter of 160mm and an internal diameter of 120mm. Calculagte the polar second moment
   1. 1 answer
   2. asked by dmkp
   3. 1,224 views
10. Assume that if the shear stress in steel exceeds about 4.00 108 N/m2, the steel ruptures.(a) Determine the shearing force
    1. 0 answers
    2. asked by Kat
    3. 1,242 views
11. 1. The problem statement, all variables and given/known dataI am using a Vishay strain indicator with it hooked up to a strain
    1. 0 answers
    2. asked by Z32
    3. 1,118 views
12. A solid shaft of 65mm outside diameter and a hollow shaft of 85mm outside diameter are connected by 6 bolts with the mean pitch
    1. 2 answers
    2. asked by Henri
    3. 623 views